Black Powder Guns & Accessories
Muzzleloader hunters need propellant that ignites reliably and burns consistently even in extreme weather conditions. Alliant's Blue MZ delivers on this tall order. The 50-grain equivalent pellets produce higher velocities than competing pellets at safe pressures, and ignite reliably with 209 shotshell primers. Blue MZ provides outstanding accuracy with a wide range of popular bullets, including the Federal Premium B.O.R. Lock MZ System. The clean-burning formulation allows for fast, easy cleaning with water-based solvents.
$18.99 - $35.99
This muzzleloader version of the X-Bullet is 100 percent copper with a large, hollow cavity for quick, sure expansion. Barnes' Expander MZ? Muzzleloader Bullets produce more consistent shot-to-shot velocities and better accuracy than competing bullets deliver. The result? Greater shooter confidence and more one-shot kills. Expander MZ bullets deliver deadly performance at both high and low velocities. Expand to twice their original diameter, creating six razor-sharp copper petals that slice through game. No fragmentation-these tough, deep-driving bullets typically retain 100 percent of their original weight.
$20.99 - $28.99
A streamlined semi-spitzer ogive, boattail base and tack-driving accuracy make the Barnes Spit-Fire? MZ a great choice for difficult long shots. Deadly at high and low velocities. Six razor-sharp copper petals create massive shock, deep penetration, and double-diameter expansion. Retains virtually 100 percent of its original weight.
$20.99 - $38.99
Barnes' NEW Spit-Fire T-EZ muzzleloader bullets load easier, even in tight bores. A new sabot reduces the ramrod pressure required to load and seat these .50-caliber, flat-base bullets. T-EZ bullets deliver the same match-grade accuracy all Barnes' MZ bullets are famous for. The 100% copper bullets feature a polymer tip that enhances expansion and boosts BC for superior long-range ballistics. They expand at both close and extended range, creating six razor-edge cutting petals that maximize shock and penetration.
$27.99 - $38.99
The Spit-Fire TMZ? shares the same boattail design and 100 percent copper construction with the Spit-Fire MZ, but has a streamlined polymer tip for faster expansion. Higher ballistic coefficient aids exceptional long-range performance. Remains intact at extreme velocities, yet expands at only 1050 fps. Redesigned sabot loads faster while retaining the tight gas seal that makes the MZ, Spit-Fire MZ and Spit-Fire TMZ the most accurate muzzleloader bullets on the market.
Features graduation from 20 to 1220 units is a convenient way to measure and carry just the right charge of Blackhorn 209 muzzleloader. Faster to load than pellets.
$159.96 - $579.98
Blackhorn 209 is a revolutionary propellant that is redefining the term "accuracy" in the muzzleloading industry. When used as directed, this high performance powder consistently shoots at higher velocities and with greater precision than any competing propellant. As the ONLY noncorrosive muzzleloading powder, Blackhorn 209 is engineered to eliminate swabbing and cleaning between shots. Precise accuracy, higher velocities and ease of use ensure Blackhorn 209 will bring out the best in your muzzleloading rifle.
$6.99 - $74.90
Assembled in traditional ribbed soft copper caps. Charged with a modern, non-mercuric, non-corrosive mix that will ignite hard to fire Pyrodex® and blackpowder. Foiled and lacquer sealed for moisture protection. Packed 100 caps in a tin, 10 tins to a case. Master pack 10 (tins).
$1.49 - $2.99
The brass patch puller, with stainless steel tines, easily retrieves cleaning patches which are lost in the bore. The bullet puller quickly removes bullets or ball stuck in the bore. Both fit all standard CVA ramrods. For .50 caliber and larger.
$1.69 - $1.89
Sturdy bronze bore cleaning brush. 10-32 thread.
This solid brass cleaning jag has a 10-32 thread size.
Cotton with sturdy frame. The 10-32 threads fit all CVA ramrods.
The perfect follow-up brush to wire brushes. Removes the smaller fouling particles.
Designed to loosen powder fouling that accumulates after shooting. Large brush cleans breech area while small brush cleans breech plugs.
Replaces the screw cap on a one pound can of Pyrodex® to make filling flasks or powder measures easier. Positive lock snap on closure eliminates spillage. Pour spout allows the shooter to top off the flask without overfilling.
A short ramrod. The sturdy synthetic ball lets you press the patched round ball or conical ball into the muzzle for easier starting. For use with .32 - .58 caliber muzzleloaders.
For Pyrodex Pellets.
Allows shooter to pre-load magnum loads for quick reloading in the field. Capable of holding three 50 grain Pyrodex? Pellets plus a saboted bullet, but will also work with lighter pellet loads or even loose powder.
Allows for easy for capping & removal of Shot shell primers.
Straight through tube allows for loading ball, patch and powder in one fluid motion. Includes pocket clip. 3 per card.
Fashioned of a non-glare, quiet, non-abrasive, high tech molded synthetic. It has a T-shaped, one-piece handle with a short and long bullet starter. The deep tapered recess fits over most conical bullets to eliminate deformation. Includes palm saver for ramrods and stud for lanyard attachment.
Formulated to withstand heat created during the ignition of powder. 2 oz. tube. Prevents nipple and breech plugs from seizing up.
Pipe cleaners with stiff bristles imbedded in the material for extra heavy duty cleaning in hard-to-get-to places.
Tight woven and resistant to burning. Brings out the most in accuracy, .015 thickness.
$3.89 - $3.99
Used to lube shooting and cleaning patches. Makes shooting easier and less messy. Safely and quickly removes fouling from the bore when used as a cleaner. Continues the barrel seasoning process with each application.
No more mess while taking care of a very important step. Stick applicator allows you to apply the Anti-Seize directly on the threads and without getting it on your hands.
Comes with a removable brass cap with built-in nipple pick. It is ideal for clearing fouling from aperture of nipple and is made of hardened steel. CVA nipple wrenches are essential for removing stubborn nipples. Fits all CVA pistols and rifle nipples, except Zouave and in-line models.
Select hardwood. Fits over ramrods to ease the pressure on the shooter's hand.
Page 1 of 12 Next page