Professional gunsmith screwdriver set comes complete with 26 hardened steel bits: Phillips, slotted, hex, torx & posidrive plus 3 long bits for recoil pad & see-thru mount installation, a full-featured screwdriver, and a 1/4" socket drive adapter all housed in a sturdy molded case and individual compartments for each item.
Birchwood Casey Gun Plumber Folding Multi Tool built from quality steel. Portable for range or field use. Gunsmith selected bits to cover your firearm repairs.
Specific tasks demand specific tools and that's why we brought you the Birchwood Casey® Weekender?. Featuring 27 professional gunsmith selected tools, the Weekender? has everything the at-home gunsmith needs to perform a multitude of tasks and projects on their beloved firearms. From the basics of mounting a scope to the complexities of model specific firearm maintenance, the Weekender? is invaluable for completing your gunsmithing tasks.
Won't shrink. Simplifies inletting. Twelve minute working time. Acid & waterproof. Will not warp or dent. Reinforces stock. Seals the inletting.
Total stability. Won't shrink. No-run formula. Goof-proof, 1-to-1 mixing ratio. Superior recoil resistance. Excellent "thin" strength. Solvent-oil-acid proof. 20 minute working time.
Kit includes: 1 oz. Resin, 1 oz. Hardener with Dye mixed in, 4cc Release Agent, Two Release Agent Application swabs, Two 4-½" x 5-½" square sheets of Sandpaper to roughen stock surfaces, 2 Spreader sticks & instructions.
WILL NOT WORK WITH 308/ Large cal rifles. Kit Includes: BT-05 Extractor Spring, BT-07 Extractor, BT-04 Ejector Roll Pin, BT-01 Gas Rings (3), BT-06 Ejector, BT-03 Extractor Pin, BT-08 Extractor Spring Assembly.
Install and disassemble Free Float Tubes. Install and disassemble Barrel nut. Install and disassemble Compensator. Install and disassemble Barrel Extension Tube. Install and disassemble Carbine Stock. 1/2" dive for socket wrench. Screw driver tip for buttstock screw. Hole for hanging on wall. 4140 Steel, mag phosphated.
The 31 piece set is great for working on the firearms or just everyday use. The pieces include a soft grip handle driver with magnetic end, assortment of 28 pieces of the most popular and a socket adapter all enclosed in a custom molded storage case.
$6.59 - $8.09
There are over 60 different modified cases available to use with Hornady Lock-N-Load Gauge. Hornady will make custom cartridges for those not listed. Details are available in the instructions. Modified cases will not work in tight neck chambers, except for the CFG-6PPCT.
A remarkably useful tool featuring one slotted screwdriver, two Torx® drivers and five hex head drivers. As practical in the field as on the bench, the Scopesmith? Mounting Tool is perfect for making windage and elevation adjustments and for installing rings and mount bases.
Install rings easily and securely without marring the rings or the scope.
$18.49 - $39.99
Lyman - an innovator in the field of reloading and shooting accessories - has introduced their Essential Maintenance Mat. Lyman's breakthrough design overcomes the shortcomings of traditional flat mats. Incorporating a collection of slightly recessed sections, the design keeps small items organized and secure from rolling off the bench and contains small spills during cleaning and lubrication. Further, the mat material is a tough but soft polymer that both protects gun finishes and is chemical resistant.
For the specialized needs of pistol work, Lyman has put together a more economical assortment of punches. This basic set utilizes the same universal handle as the Gunsmith's Set with the following punches: 1/16", 3/32", 1/8", 5/32" and brass drift punch.
This solid, 10 oz brass hammer is perfect for dent removal and delicate metal work. Hammer features sturdy and durable construction with 3 interchangeable heads: steel, brass and nylon. A brass drift punch is also included and stores in the handle. 10" overall length.
Designed to be the fastest and most accurate Trigger Pull Gauge available on the market. Unlike other gauges, there are no weights or sliding pointers to contend with. Simply place the gauge on the trigger and pull! This instrument will accurately record the results, as you can take multiple readings and then take the average weight for the string at the touch of a button.
The BEV Block (Barrel Extension Vise) is an all-in-one, compact vise block tool for AR15/M4 assembly operations of barrel nuts, flash hiders, etc. Mounts securely in a vise and provides support for both billet and forged upper receivers. Engages barrel extension with solid steel lugs and full length support shank to prevent flexing. Steel hardness is optimized for durability yet won't damage barrel extension, and Magpul Polymer is used for all other engagement surfaces to protect aluminum receiver. O-ring post uses bolt carrier for additional stability and included Pin keeps upper in proper position. The BEV can also be turned over and used as a mag well vise block to support the lower receiver during maintenance, etc. Made in U.S.A.
American-made, solid steel construction with grip-enhancing phosphate finish engages both stock and pin-style barrel nuts. Fits standard sized flash hiders. Installs and removes rifle receiver extensions and carbine castle nuts, with extended teeth for use with ASAP plates. Two hammer faces. Works with 1/2" torque wrench, relevant torque specifications included on Wrench for quick reference. Convenient Bottle Opener for refreshments after the build is complete (fits both Metric and SAE bottle caps.) Made in U.S.A.
This is one of the best gun maintenance support and gun cleaning products on the market. Designed for quick gun cleaning of rifles or shotguns. Ideal for mounting scopes, swivels, bedding of actions, etc. To eliminate spills, compartments are provided for you bore solvent, rust prevents, patches and screwdrivers. The removable forks have molded-on rubber padding to protect your firearm and can hold two cleaning rods. Each fork has two height adjustments, giving you a combination of height adjustments to hold the firearm level up right or upside down. The large middle section is to store all you tools and cleaning supplies in one area. No workbench is complete without the Gunsmith's Maintenance Center by MTM Case-Guard?. Dimensions: 29.5"x4"x9.5".
Designed to be brought to the range for easy cleaning of rifles or shotguns. The RMC-1 will fit conveniently on top for transportation. The rubber overmolded padded forks pop out and can be stored in the base along with your cleaning supplies. You can mount scopes, swivels, bedding of actions, etc. The large middle section is to store your tools and cleaning supplies in one area. Dimensions: 23.2"x 3.5"x 11". Color: Red.
Designed to support both rifles and shotguns. It offers a fast, single adjustment clamp down with a non-marring, rubber padded hold. High and low gun forks give the option of a level clamp up for maintenance or a sloped clamp up for drainage, while cleaning. Shotgun barrels are held securely for easy cleaning. The MTM Gun Vise allows a shooter room to organize cleaning supplies, bottles and other items into 14 separate compartments. A small divided tray slides to uncover more compartments in the base unit for smaller easy to lose items. Eleven screw driver bit holders, molded into the unit, are just as easily suited for jags and brushes as they are bits. And, paying close attention to details, a place is provided - low and out of the way - for holding two cleaning rods, no more trying to figure out where to rest your rod while making adjustments. Made to last from rugged, chemical & solvent resistant polypropylene plastic.
Finally an Armorers Wrench with everything that you need. This unique tool combines all of the necessary tools to eliminate the need of owning multiple wrench types. Use it for all of your M16 or AR-15 rifles and all of their variants.
AR15 Armorer's Barrel Wrench - Generation 2. Combo tool with many New Features/Tools to work and upgrade your AR-15/ M4/ M16. Barrel Wrench for GI Barrel Nut, Free-Float Barrel Nuts with GI spacing, DD Barrel Nuts, and YHM ( 1¾") Spanner wrench. A2 (¾") and 5/8 Flash Suppressor wrench, M4 Collapsable Stock Castle Nut wrench, A2 Buffer Tube Wrench. Flat Blade Screw Driver for A2 Buttstock Plate, 1/2" and 3/8" Drive Compatible, Lower Receiver Push Pin Tool. 1/4" Hex Bit Drive Socket, 1911 Barrel Bushing Wrench, and a Tactical Bottle Opener. All the Tools are Clearly Labeled. Steel Construction. Length: 13.8". Weight: 13.0 oz.
MSR/AR-15 rifle owners know the importance of a clean bolt and bolt carrier group. Carbon and fouling can build-up in these areas, causing jams and malfunctions. The B.O.N.E. Tool was designed specifically to clean the bolt carrier assembly area of .223 Rem/5.56mm NATO rifles. Otis Technology BONE Tool FG246. Scrapes carbon and fouling from the Bolt, Bolt. Carrier and Firing Pin. Threaded hole is 8-32. Can act as a T handle.
Pachmayr's 30 piece gunsmith screwdriver set contains the best selection of bits for working on all firearms. Gunsmith slotted bits for action screws, hex bits to fit the new scope mounting screws and Phillips bits including special long Phillips bits for buttplate and recoil pad removal. A must for the serious shooter.
Ar-15/M16 Upper and lower receiver magazine well vise block set is a three pieces of heavy-duty blocks securely clamp all flat top & carry handle AR-15/M16 upper & lower receiver components to prevent damage or movement during repair, assembly & cleaning. Constructed of impact-resistant glass-filled nylon.
Page 1 of 3 Next page