Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Reloading dies

Hornady Neck Sizing Dies
$23.99
Neck sizing with this die can eliminate problems of excessive head space, and align the bullet perfectly with the bore, resulting in better accuracy and longer case life. Should only be used for bolt-action rifle cases. Auto-loading, lever and pump action rifles usually require full-length resizing.
Hornady Full-Length Die Sets
$25.99 - $94.99
Full-length die set includes full-length size die, seating die and expander assembly.
Hornady American Die Set
$28.99 - $44.99
Each die set includes a FREE shell holder. Sizing dies size to SAAMI specifications. Internal spindles, expanders and seating stems are interchangeable with other components on the market. Basic reloading data and two extra decapping pins are also included. All Hornady reloading tools and accessories are warranted against material defects and workmanship for the life of the product.
Hornady Three Die Taper Crimp
$46.99
Hornady Custom Grade Nitride 3-die set that includes a seater die with taper crimp.
No Image
$54.99 - $89.99
Hornady Three Die Pistol Set
$54.99
The Cowboy Die sets have been designed for cast bullet reloaders. Each set includes a Full-length sizing die, and adjustable case mouth expander die and seater die that is designed for working with lead bullets. This special seater helps to ensure that ammunition is loaded without deforming lead bullets.
Hornady 50 Cal. Die Set
$299.99
Created from select steel and heat-treated for durability and a lifetime of reloading, the Hornady Custom Grade? New Dimension? 50 Cal. Die Set is so well-crafted, it's guaranteed never to break or wear out from normal use.
Hornady Precision Reloader Accessory Kit
$459.99
The Hornady Precision Reloader Accessory Kit will allow you the opportunity to produce the most accurate reloads possible. Includes: Concentricity Tool. Cam Lock Trimmer. Cam Lock Power Adapter. Lock-N-Load OAL Gauge Curved. Lock-N-Load Comparator Set. Lock-N-Load Headspace Kit. Lock-N-Load Case Prep Trio. Steel Dial Caliper.
Hornady Lock-N-Load Case Prep Center
$569.99
Micro adjustable to 1/1000 inch. Trim cases from 3/4 inch to 3 1/4 inches in length. Vertical design of the power trimmer and horizontal design of the tools keeps shavings from falling into cases and makes case discharge easy. Power camfer/deburr tool. Large and small primer pocket cleaners included. Comes with five popular neck brush sizes.
Lee Rifle Charging Die
$13.49
Lee Rifle Charging Die charges small capacity rifle cases when used with the Auto Disk Powder Measure or Pro Auto Disk Powder Measure. It works the same as the pistol powder through expanding die, except it doesn`t expand the case mouth. Rifle case expansion is done in the sizing die. Can be used on 22 cal. cartridges and up to and including the .308 Win.
Lee Pacesetter Dies
$32.99 - $36.99
Lee PaceSetter Dies include the exclusive Lee Factory Crimp Die to produce factory-like ammunition with improved utility and accuracy. The die set also includes a conventional bullet seater and roll crimper. You can choose the type of crimp you desire. They also include a shell holder, powder dipper, load data and are packed in the nicest storage box ever designed. These are the most copied dies in the world. Every die comes with a written lifetime warranty, 2 year guarantee and guarantee of accuracy or your money back! This set is recommended for assembling ammunition for hunting purposes as the finished rounds chamber easily and can withstand rough handling of the firearm action. Includes full length sizer, bullet seater & roll crimper, factory crimp die, built in stuck case remover, long guided expander, shell holder, powder dipper and load data and instructions.
Lee Pacesetter Limited Die Set
$32.99 - $36.99
Lee's limited production pacesetter dies carry the same features and quality of standard dies, but do not include a Lee factory crimp die. You'll find no better die at any other price. Half the price of competitive dies and theirs doesn't include load data which is priceless on odd or absolete calibers.
Lee Carbide 3-Die Sets
$33.99 - $37.99
We use a solid carbide insert, ground to a special contour that does not leave the objectional belt mark on the case, common to ordinary carbide dies. With a carbide sizer, no case lube is needed, and you don't even have to clean your cases.
RCBS Neck Sizer Die (Group A)
$34.99
RCBS Neck Sizer Dies size only the neck of case (not the shoulder or body) just enough to snugly hold the bullet which leads to increase case life and accuracy.
RCBS Small Base Die Set
$42.99
RCBS Small Base 2-Die sets are useful for reloaders loading for semi-automatic, pump action and lever action rifles to help ensure that proper functioning. Small base sizing dies size brass to minimum specifications and help to ensure that cartridges will chamber every time. Due to the fact that this product sizes more than regular dies, it is crucial to have a sufficient amount of high quality lubricant to prevent stuck cases.
RCBS 3-Die Sets
$43.99 - $59.99
RCBS pioneered and developed the 3-Die Set for straight wall rifle and pistol cases. In the 3-Die Set, sizing and expanding (belling) are done in separate dies. The 3-Die Set has a Sizer Die with Decapping Unit, Expander Die for expanding and belling the case mouth and a Seater Die with Bullet Seater Plug(s) for seating and crimping the bullet.
RCBS Full Length Die Sets (Group A)
$44.99 - $89.99
These 2 die-sets are one-piece reamer construction and hardened steel. Non-slip separate collect holds expander decapping pin in place, perfectly centered. Wrench flats and body knurling for easy adjustments. Steel hex lock rings with set screws.
RCBS Full Length Die Sets (Group A)
$44.99 - $89.99
These 2 die-sets are one-piece reamer construction and hardened steel. Non-slip separate collect holds expander decapping pin in place, perfectly centered. Wrench flats and body knurling for easy adjustments. Steel hex lock rings with set screws.
RCBS Full Length Die Sets (Group A)
$44.99 - $89.99
These 2 die-sets are one-piece reamer construction and hardened steel. Non-slip separate collect holds expander decapping pin in place, perfectly centered. Wrench flats and body knurling for easy adjustments. Steel hex lock rings with set screws.
RCBS Full Length Die Sets (Group A)
$44.99 - $79.99
These 2 die-sets are one-piece reamer construction and hardened steel. Non-slip separate collect holds expander decapping pin in place, perfectly centered. Wrench flats and body knurling for easy adjustments. Steel hex lock rings with set screws.
RCBS Full Length Die Sets (Group A)
$44.99 - $89.99
These 2 die-sets are one-piece reamer construction and hardened steel. Non-slip separate collect holds expander decapping pin in place, perfectly centered. Wrench flats and body knurling for easy adjustments. Steel hex lock rings with set screws.
RCBS Full Length Die Sets (Group A)
$44.99 - $89.99
These 2 die-sets are one-piece reamer construction and hardened steel. Non-slip separate collect holds expander decapping pin in place, perfectly centered. Wrench flats and body knurling for easy adjustments. Steel hex lock rings with set screws.
Page 1 of 2 Next page