Super-lightweight design for downriggers and large diameter stainless wire bail which results in less line wear and smoother releases.
Designed to be snapped directly on to your existing downrigger cable's snap swivel. The downrigger ball or planer can then be snapped on to the terminal end of the DCW-1. Once the bait or lure is let out, the fishing line should be twisted 8 to 10 times before it is loaded into the Goldfinger Release Clip - which provides an instant and precise drop back every time.
Designed to be crimped directly to your existing downrigger cable with the special mini-double crimp provided in the package. Once the 100 feet of special 100-lb. low visibility monofilament line is wound on the downrigger's spool, the Goldfinger Release Clip will be positioned out of the water where it can be easily loaded, while the downrigger ball or planer remains safely below the surface where it can't swing and damage the boat's hull.
$32.99 - $45.99
Specially stranded to provide the flexibility and resistance to bending fatigue required for use on downriggers. Wire comes with pre-rigged assemblies. The complete assembly includes a stainless steel thimble and a 225lb. stainless steel coast lock snap swivel. Ideal for fresh and saltwater use and is designed for all makes of manual and electric downriggers. Bright stainless steel.
$9.19 - $10.49
The clip simply threads on the downrigger or kite line and is held in position with a crimped sleeve, split shot, barrel swivel, or even a simple knot in the line. Made of nylon, brass and stainless steel.
Simply snap the Release Clip assembly on to the existing terminal end of your downrigger. Assembly allows the ball to remain safely in the water while you attach your finishing line. Constructed of 135 lb. nylon coated stainless steel wire, stainless steel thimbles, with snap lock and swivel.
$6.89 - $29.99
For any make of downrigger. Includes six crimpless snap-on terminators, six snap-on swivels and six cushion tops.
Spring-action clip opens quick and easily with finger pressure. 2 to 12 pound tension range. The deeper the line is set back in the pads, the greater the pressure.
$15.99 - $18.49
It's truly a "universal" release because it can cover so many different tension settings. It has two adjustment points to allow tension settings from 2 to 22 lb. Perfect for slow trolling with live baits, or going after light-hitting walleyes. Also, tough enough to handle heavy saltwater plugs.
Pulls in heavy downrigger weights safely and easily. No dangerous leaning out or swinging the long boom in to change lures or work on lines. Complete with pulley.
$19.49 - $21.99
Offshore Line Release: Features a spring-action clip that opens quickly and easily with finger pressure. Comes with 6" of cable and a snap swivel for attaching to a trolling weight. Offshore Stacker Release: The stacker has two releases wired together at different lengths from a snap swivel that is attached to the weight. Quick Release: A small easy-to-handle line release with adjustable tension. Quick Stacker Release: Fish more lines off the same downrigger.
Choose 150' of 7-strand, 302-grade stainless steel cable; or 200' and 400' lengths of 7-strand, 316 grade stainless steel cable. Each cable is 150 pound test.
This strong, durable tab-lock base is made of 100% heavy-duty Lexan®. Fits Sport-Troll, Easi-Troll, and Mini-Mag.
Locks large bodied downriggers securely to the boat with a pin-tumbler lock. Fits Digi-Troll 10, Digi-Troll 5, Mag 5 ST and Mag 10 STX models.
Protect your downrigger with a professional grade cover. It guards against the elements with a secure Velcro® fit and non-abrasive backing.
$45.99 - $64.99
These trolling weights are vinyl-coated to prevent scratches to your boat. High-quality reflective prism tape on the fin for extra fish attraction.
Vinyl coated to prevent scratching the side of the boat; uses reflective prism tape on the fin for extra fish attraction.
$79.99 - $134.99
Slide the mount's gimbal tube into your boat's recessed rod holder. Once in place, you have a base ready to accept your downrigger. Removes easily by pulling it up and out of your rod holder.
Heavy-duty Lexan® and stainless steel swivel base. Six-point locking, including two 45° positions. For all Cannon® downriggers.
With 16 locking points, this base allows for 360° downrigger rotation with locking positions every 22.5°. Built from 316 stainless steel for strength and corrosion resistance.
Extended, stainless steel. Fits Penn: 9/0, 6/0H, 4/0, 4/0H, 349, 681 67, 66. Fits Daiwa: 900H, & 600H.
Allows the bait to stay with the fish after the initial strike. When the fish makes its final lunge, set the hook and you have your fish.
Featuring an E/Z Adjust tension screw. Securely mounts on rod with plastic locking tie.
Rust resistant and feature our E/Z Adjust Tension Screw for fine tuning of line release tension. Gives a clean release when fish strikes. Mounts between the thimble and ball giving a clean release when the fish hits.
Made of solid brass. Straightens wire sizes 5-15 gauge. Blister packed and carded.
It's 10lbs of true-tracking, fish catching downrigger with the unique fish shape! This one's a real keeper!
The Shasta Ultra Release is by far the most versatile and lightest downrigger line release ever built. This simple ultra-light release with its tension screw adjustment has proven itself as not only a great release but is ideal for stacking multiple lines on one downrigger. This release can be set light enough to release on even small fish.
A downrigger release carrier. Attached to your downrigger cable, the diver will take your release, line, and lure to a desired depth until released. Then returns to the surface to be sent down again. Making it unnecessary to raise or lower your downrigger weight.
This kit includes connector sleeves, thimbles, beads and snaps. Everything you need for making up your own downrigger wire assembly. Enough to do two complete assemblies.
Page 1 of 4 Next page