Fish finder accessories
Night Fishing Cover
A transparent cover replacement enabling Deeper sonars to light up whenever the night fishing mode is selected on the Deeper App. Main Features: visibility for night fishing. Best option for: night fishing, low visibility conditions.
Smartphone Mount for Fishing Rod
Fitting any type of rod, the Deeper Smartphone Mount is a secure, easy-to-use silicone mount. It enables fishers to monitor the sonar data from their Deeper device while keeping both hands free for reeling in that catch. Main Features: Hands-free usage. Best option for: shore fishing, wading.
Winter Smartphone Case for Ice Fishing
$30.99 - $34.99
Preserve your phone's battery, and keep it protected and always accessible, with the Deeper Winter Smartphone Case for Ice Fishing. It's the ideal ice fishing gear for smart ice anglers.
Winter Smartphone Case for Ice Fishing XL
Transform your boat, kayak or float tube into a hi-spec sonar system. Simply attach your Deeper Sonar (3.0, PRO or PRO+), clamp the flex arm to your vessel, and troll your sonar to create incredible maps or pin-point your targets.
Flexible Arm Mount 2.0 designed for Kayaks and Boats
Power Cable replacements for all Humminbird fishfinders, radios, and GPS equipment have a connector at one end and soldered bare leads for connection to the power source at the other. Power connection should be made to the boat's fuse panel or through an inline fuse holder (not included on most cables) if made directly to the battery.
Only for Gimbal Mount installations. If HELIX 7 Series is mounted in dash the unit cover will not fit.
$23.99 - $319.99
This hardware kit allows you to mount your XNT transducer to your trolling motor rather than the transom.
This Ethernet Adapter Cable is required if you want to network (Ethernet) capabilities on a 7x8 HD Series, 8x9ci HD Series, 9x9ci HD Series, 11x9ci HD Series Humminbird product. This cable is approximately 12 inches long. If you are networking two of these products, you will require two AS EC QDE cables plus one of our Ethernet cables. If you are networking one 7x8 HD Series, 8x9ci HD Series, 9x9ci HD Series, or 11x9ci HD Series product with a pre-2014 8x8, 9x8 or 11x8 Series product, you will only need one adapter plus one Ethernet cable. Software updates on some 7x8 HD and some 8x8c, 9x8c and 11x8c Series products may also be necessary.
?Mounting hardware for the XM 9 20 MSI T.
?This hardware kit adapts ourMEGA transom mount transducer for use on the trolling motor.
Ethernet Cable. Measures 10 Feet. Quickly Setup An Ethernet. Connection Between Two Ethernet Capable Units.
ONIX or SOLIX GPS/NMEA 0183 Splitter Cable -allows you toconnect an external GPS receiver(AS GRP or AS GPS HS)toa unit and it pigtails offfor a NMEA 0183 communication feed? if needed
The Ethernet Cable is a 20' cable that allows the connection of two Ethernet capable units to be connected.
$79.99 - $269.99
Transom transducers mount on the transom (back) of the boat in contact with the surface of the water. Many models incorporate an impact release feature that allows the transducer to pivot up and out of the way if struck by an object. 20 ft of cable and hardware included. 0190-2087:dual beam, 200 KHz/83 kHz, 20 ft cable. For Use With: 200DX, PRO ANGLER, PRO ANGLER 160, NS25, TRACKER PRO 128, TFX100ID, TFXIDD, XTREME 160, HDR600. 0190-2086:Transom Mount Tri/QuadraBeam Transducer with built in Temperature Sensor. For Use With: Matrix 35, Matrix 37. 0190-2088: Transom mount tri-beam transducer, 20 ft cable. This transducer is used with plastic mounting bracket. Used with the WIDE OPTIC, WIDE PORTRAIT, WIDE PANORAMA, WIDE PARAMOUNT, TOUR SERIES, 300TX, 400TX. 0190-2075: High-speed transom mount transducer, 200 kHz, 20 ft cable, modular connector, 24° cone angle, high speed hardware. For Use With: WIDE 100, WIDE 128, 100SX, 105SX, 405SX, 405SX Plus, Pro Angler 400SX. 0190-2074: High-speed transom mount transducer, 200 kHz, 20 ft cable, modular connector, 16° cone angle, high-speed hardware. For Use With: LCR400, LCR400 ID, HDR 200I, HDR 600I, LCR 100I, LCR 100G, OEM-LCR, SR ID-600, ULTIMA, HBL201G, LCR-W, WIDE W, PLATINUM ID 600, TCR ID 10, TFX100ID. Used as a secondary transducer to extend depth range on WIDE 3D PARAMOUNT. check description
Mount on most trolling motors. Low-profile shape reduces drag and hang-ups on weeds.
XPT 9 20 T Depth transducer w/ temp, MFG# 710161-1, 83/200KHz, 60/20 beam angles, with temperature sensor. Suction cup transom mount. Includes 15' cable with 7 pin modular connector.
Make your Humminbird unit Bluetooth® wireless capable with this easy to install dongle, just plug it into your unit and pair it with your Humminbird Bluetooth remote for quick, convenient control of your most used functions. Take wireless control of your Humminbird. The wireless remote lets you mark waypoints on the fly, zoom in and out, adjust sonar sensitivity and toggle through your favorite custom views.
This Humminbird transducer features a dual/high definition side imaging transom and a built-in rapid response temp probe. This Humminbird trolling motor transducer operates at 200 kHz, 83 kHz and 455 kHz frequencies. Make it even easier to catch your fish when you attach this transducer to the trolling motor.
?Soft sided portable carrying case. Includes9 Amp Hourbattery,wall charger, and all items shown in image onthe left side.
Page 1 of 4 Next page