Filter By:

  • Show More Brands
  • Show Fewer Brands

Outriggers & Accessories

Aftco Goldfinger?
Features a super-lightweight design for kites or outriggers and large diameter stainless wire bail which results in less line wear and smoother releases. The OC-1 Outrigger release clip should be attached directly to the outrigger halyard without the use of swivels. The adjustment-slider end of the clip needs to be up towards the tip of the outrigger. For fixed position bait trolling, the fishing line should be twisted 5 to 10 times before hooking the loop over the bail. The line may also be passed over the bail without twists to allow for adjustment of baits or lures.
Aftco Roller Troller®
The AFTCO Flat Line Clip, with a 135-lb. coated stainless steel cable and heavy duty snap-swivel attached, can be rigged from the stern of the boat to put trolling lines into the water at a lower angle, helping to minimize the tangling that might otherwise occur when trolling with multiple lines, and keep your lures running below the surface for better action. Once the clip's tension is set, our precision-engineered latching system releases your line repeatedly at exactly the same pull to assure fewer missed strikes and less broken lines. Featured is AFTCO's legendary "roller guide action", where trolling lines roll smoothly over a polished stainless steel roller that turns right with the line - virtually eliminating friction and fraying. Your line remains strong and ready to absorb the stress from the sudden impact of a strike.
Aftco Kite Clip Kit
Includes everything needed to set up a kite fly-line for fishing one or two baits, except the Dacron® or monofilament line. Each 11-piece set includes two Goldfinger? Release Clips, three black barrel swivels, five kite hooks, and one heavy-duty snap.
Aftco Outrigger Release Clips
The AFTCO Outrigger Clip helps you to position a trolling lure from an outrigger by simply reeling in or letting out line right through the clip, where the line rides safely on a roller that features silky-smooth action. The clip's tension adjustment is positive yet sensitive over a wide range of settings, and once the tension is set, our precision-engineered latching system releases your line repeatedly at exactly the same pull to assure fewer missed strikes and less broken line and gear.
Aftco All Weather Kite Fishing System
Completely waterproof and extremely durable, the kites are constructed of super-durable, ripstop, nylon sailcloth and will not rot or mildew. The kites can be used in all wind conditions from 4 to 25-plus miles an hour and feature easily adjustable Dacron® bridle and handy loops sewn into the back of the sail for attaching helium balloons for light wind use.
Black Marine Outrigger Ball Stops
Prevents swivels from jamming in the top of the outriggers.
Black Marine Outrigger Release Clip
Designed to keep outrigger line and fishing line from fouling and give a clean release. Use with outrigger, downrigger and kite. Made of nylon, brass and stainless steel.
Black Marine Flat Line Release Clip
Simply snap the Release Clip assembly to a rope or transom ring, or dive platform on the transom of your boat. Allows bait to be trolled below the surface and keep lines from being wind blown into other lines causing tangles.
Black Marine Outrigger Line Replacement Kit
$12.99 - $17.49
100' of 400lb test premium grade mono for outriggers with crimps included. Rigs two outriggers up to 22' long.
Black Marine Glass Ring Snubbers
Black's Glass Ring Snubbers are seamlessly fired to produce a smooth glass surface with no nicks or imperfections. Features two 12" Glass Ring Snubbers.
Black Marine Kite Release Clip Kit
$24.99 - $31.99
Black with pre-drilled clips #5,#7 Swivels & Snap Swwivels.
Black Marine Complete Outrigger Kit
All the hardware you need to rig two outriggers up to 22ft. Kit Contains: 2 Outrigger Releases, 100ft of 400lb black mono with crimp sleeves, 2-12" Glass Ring Snubbers, 2 Outrigger Stop Balls, 4 Snap Swivels, and 2 Stainless steel pad eyes and screws.
Calcutta Outrigger Stops
$2.99 - $3.19
Made of heavy duty high impact plastic and are UV resistant. These stops will prevent your outrigger rigging from getting tangled in your outrigger guides.
Calcutta Kite Line Marker
$3.79 - $4.99
Calcutta kite line markers makes finding your baits a breeze. Calcutta's kite markers comes in orange tape and bright colored corks.
Calcutta Rubber Bands
$8.29 - $14.90
Made of quality 100% US rubber materials that won't melt or crack under the most adverse conditions. Whether you are rigging up bally hoos, troll lures off shore or dropping your favorite bait on a down rigger, Calcutta has the right rubber band for you.
Calcutta Livebait Balloons
Assorted colors. 8 per pack.
Calcutta Kite Clips
If you want to make the most of your kite when fishing make sure you are using the only release clips designed especially for kite fishing. These quality kite clips come in three different sizes.
Du-Bro Outrigger Release Trip
Du-Bro Release Clips are rust resistant and feature our E/Z Adjust Tension Screw for fine tuning of line release tension. Gives a clean release when fish strikes. The Outrigger Release Clip mounts easily and securely giving a good clean release when the fish hits.
Malin Outrigger Pulleys
$17.49 - $29.99
Made of stainless steel and U/V stabilized plastic. They are designed to be snapped on the outrigger eyes.
Malin Quicklipoutrigger Clip
Quicklip has a unique and innovative feature called "remote manual release." RMR allows the angler the quickest dropback in the industry. To achieve this dropback, the angler simply pulls the halyard until the clip hits the top outrigger eye/pulley, where it releases, and the fishing line falls free. These clips offer all the standard features of any other outrigger clip. Fully adjustable release tension from zero to about 30 pounds.
Malin Shock Cords, Snaps & Pulleys
$19.99 - $31.99
Come in lengths of 8, 12, 16 and 20 inches. They use 3/8" shock cord and stainless steel hardware. They are available in black or white. Shock pulleys are single or double. The outrigger shock cords and pulleys are heavy duty 3/8". They come in 12" lengths and are available in solid black.
Malin Halyard Pulley
When used in conjunction with a shock cord, the angler can position his tag line or outrigger clip for maximum lure performance and lock the halyard in place. This is achieved by twisting the pulley body, placing several twists in the halyard and then locking the single ring snap swivel. This will prevent the halyard from twisting, which prevents it from slipping down as you troll.
Malin Rigging Kits
Includes 100 ft. of half yard material, stainless steel eye straps with screws, crimp sleeves, large snaps, and a pair of outrigger shock cords and pulleys.
No Image
$34.99 - $41.99
Rupp Zip Clips®
Provides versatile performance for use with outriggers, downriggers, kites, and even flat lines. Zip Clips® special tension adjuster allows precise light tackle setting and the proven state-of-the-art design gives flawless, tangle-free performance.
Page 1 of 3 Next page